Have you ever lost a button in the washing machine? Or have you ever wanted to simply add a cute button to an apron or shirt? Follow this step-by-step tutorial and you will want to sew buttons onto all of your fabrics... or at least save you some money by not having to throw away clothes because they're missing a button.
Ironically, the week before I had planned to post about sewing on a button, my husband just so happened to lose a button on one of his favorite shirts while we were in Hawaii. We'll use his shirt as an example...
Step 1: Grab your supplies: seam ripper, a button, a needle, matching thread, and a pair of scissors. If you will be replacing a button on a shirt or jacket, look for the replacement button inside of the shirt material, specifically along the seam around the bottom. Then use your seam ripper to release the button from the shirt (see below).
Step 2: Find the original spot for the button or decide on the place you want to add a new embellishment button. How do you find that spot? Glad you asked. There should be either some broken thread or a couple of itty-bitty holes from where the thread was before. Still not able to figure it out? Easy sauce. Fasten up the other buttons and pass a pin through the hole of the missing button. Whichever way you do it, make sure you mark the replacement button spot with chalk.
Step 3: Thread the needle. (See below for thorough photographic instructions.) Pull one end of the thread through the eye of the needle. Pull that end of thread to meet the other. Knot the ends together by making a loop and pulling the tails through. Knot once more, and trim off any excess.
Step 4: Let's get stitchin'. First, push your needle up through the back of the fabric to the front, pulling the thread all the way through. Slide your button on down the thread to meet the fabric. Are your holes lined up with the button in place?
Now you can push your needle down through the opposite hole and out the back of the fabric. Make sure your stitching matches the pattern of your other buttons. Repeat this four or five times per hole. The thread should be tight enough as to where the button doesn't dangle. At the same time, it should be loose enough as to where your fabric doesn't bunch up. Whew!
Step 5: Shank and Snip... Push your needle up through the back of the fabric to the shank (which is the thread located between the fabric and button). See the needle in the top two photos below? Pull the button away from the fabric and wrap your thread tightly around the shank. Simply slip the needle through the shank twice and trim the leftover thread.
Step 6: Boo-yah. Congratulations... Wear and wash that shirt with pride! Nicely done.
With that being said, learn how to sew a button.
You Only Live Once...